Add a station

Register the box, then enrol its agent with a one-use code.

Profile changes are stored by the prototype agent. They do not configure the GNSS receiver yet.

Connect your station

Use this code when the Pi agent asks for enrolment. It works once and expires in 30 minutes.

On the Pi, run the agent command in README.md. The code is entered at a prompt so it stays out of shell history.

Once connected, the station will appear online automatically.

Build test SD image

Station ID:

Hardware: Raspberry Pi 3B + Mosaic-X5

Management address:

Building a new image invalidates earlier setup codes for this station. Use each image for one Pi only. Downloads are kept for 7 days.

Ethernet bench-test image. Includes RTKBase, branding, automatic dashboard enrolment and Tailscale with owner approval. Receiver configuration, fixed antenna coordinates and NTRIP credentials still need commissioning. Hardware boot testing is pending. Write the downloaded .img.xz using Raspberry Pi Imager → Use custom; skip OS customisation. Use an 8 GB or larger SD card.

Change password

Use at least 12 characters. All sessions will be signed out.